DGT pi chess computer question

This forum is for general discussions and questions, including Collectors Corner and anything to do with Computer chess.

Moderators: Harvey Williamson, Steve B, Watchman

Forum rules
This textbox is used to restore diagrams posted with the fen tag before the upgrade.
Post Reply
Celadus
Member
Posts: 256
Joined: Sun May 06, 2012 11:29 am

DGT pi chess computer question

Post by Celadus »

I was expecting the pi to move immediately with white when the DGT board
has the black pieces set at the bottom. It does not.

I am unable to get white to move when placed at the top of the board.

Any ideas why?
User avatar
Scally
Full Member
Posts: 970
Joined: Sun Jun 05, 2016 5:44 pm
Location: Bermondsey, London
Contact:

Post by Scally »

Hi Celadus,

On the DGT Pi, all you do is set the pieces up with White on the opposite side of the board then press the clock lever, PicoChess should then move as White from the opposite side of the board.

I’m abroad now until the 16th, if you have any questions please direct them to the PicoChess forum at https://groups.google.com/forum/m/?from ... /picochess
(Cut & paste past the highlighted text onto a fresh web page)


Cheers,

Al.
Celadus
Member
Posts: 256
Joined: Sun May 06, 2012 11:29 am

Post by Celadus »

Scally wrote:Hi Celadus,

On the DGT Pi, all you do is set the pieces up with White on the opposite side of the board then press the clock lever, PicoChess should then move as White from the opposite side of the board.

I’m abroad now until the 16th, if you have any questions please direct them to the PicoChess forum at https://groups.google.com/forum/m/?from ... /picochess
(Cut & paste past the highlighted text onto a fresh web page)


Cheers,

Al.
Thanks a lot. It is now playing white from the top of the board.
I shall in future ask questions at PicoChess forum.
Post Reply