Novag Super Expert on ebay
Moderators: Harvey Williamson, Steve B, Watchman
Forum rules
This textbox is used to restore diagrams posted with the fen tag before the upgrade.
This textbox is used to restore diagrams posted with the fen tag before the upgrade.
Novag Super Expert on ebay
I'm the current high bidder, but for how long?
http://cgi.ebay.com.au/ws/eBayISAPI.dll ... 0153303863
I'm expecting it to go for about $800. It still has over a week to go.
The Novag machines are reliable, and give most of their playing
strength on the quick time settings.
all the best
Larry
http://cgi.ebay.com.au/ws/eBayISAPI.dll ... 0153303863
I'm expecting it to go for about $800. It still has over a week to go.
The Novag machines are reliable, and give most of their playing
strength on the quick time settings.
all the best
Larry
- Steve B
- Site Admin
- Posts: 10140
- Joined: Sun Jul 29, 2007 10:02 am
- Location: New York City USofA
- Contact:
Re: Novag Super Expert on ebay
Larry wrote:I'm the current high bidder, but for how long?
http://cgi.ebay.com.au/ws/eBayISAPI.dll ... 0153303863
I'm expecting it to go for about $800. It still has over a week to go.
The Novag machines are reliable, and give most of their playing
strength on the quick time settings.
all the best
Larry
Looks like it is not the C6 version
hard to tell but it might be the B or even the A program running at 5 or 6 Mhz
Good Luck Regards
Steve
Re: Novag Super Expert on ebay
Looks like it is not the C6 version
hard to tell but it might be the B or even the A program running at 5 or 6 Mhz
Good Luck Regards
Steve
Oops!.... looks like I'm the current high bidder on an 'A'.
Oh well, over a week to go in the bidding. I messaged the seller and
here is his reply:
------------------------------------------------------------------------------------
" I'll double check, but I believe another bidder and I figured that it is an "A" model since it was from 1987 (box and original invoice say '87)
Look for what I discover as an addition to the listing. Thanks!~"
-------------------------------------------------------------------------------------
It's got to be worth $400 though, even if it is an 'A'
all the best
Larry
PS It's possible to update the eprom, I'm told
hard to tell but it might be the B or even the A program running at 5 or 6 Mhz
Good Luck Regards
Steve
Oops!.... looks like I'm the current high bidder on an 'A'.
Oh well, over a week to go in the bidding. I messaged the seller and
here is his reply:
------------------------------------------------------------------------------------
" I'll double check, but I believe another bidder and I figured that it is an "A" model since it was from 1987 (box and original invoice say '87)
Look for what I discover as an addition to the listing. Thanks!~"
-------------------------------------------------------------------------------------
It's got to be worth $400 though, even if it is an 'A'
all the best
Larry
PS It's possible to update the eprom, I'm told
- Steve B
- Site Admin
- Posts: 10140
- Joined: Sun Jul 29, 2007 10:02 am
- Location: New York City USofA
- Contact:
Re: Novag Super Expert on ebay
i guess you can do thatLarry wrote:Looks like it is not the C6 version
hard to tell but it might be the B or even the A program running at 5 or 6 Mhz
Good Luck Regards
Steve
Oops!.... looks like I'm the current high bidder on an 'A'.
Oh well, over a week to go in the bidding. I messaged the seller and
here is his reply:
------------------------------------------------------------------------------------
" I'll double check, but I believe another bidder and I figured that it is an "A" model since it was from 1987 (box and original invoice say '87)
Look for what I discover as an addition to the listing. Thanks!~"
-------------------------------------------------------------------------------------
It's got to be worth $400 though, even if it is an 'A'
all the best
Larry
PS It's possible to update the eprom, I'm told
but then you most probably will have an A5 Mhz which i guess you could live with as well
also you should know the size of the A board in terms of length and width is a bit smaller then the B and C boards
Best
Steve
-
- Member
- Posts: 52
- Joined: Fri Aug 03, 2007 9:33 pm
Re: Novag Super Expert on ebay
Hello Steve. How much is a ''bit smaller than''?....Thanks Jaimes.Steve B wrote:i guess you can do thatLarry wrote:Looks like it is not the C6 version
hard to tell but it might be the B or even the A program running at 5 or 6 Mhz
Good Luck Regards
Steve
Oops!.... looks like I'm the current high bidder on an 'A'.
Oh well, over a week to go in the bidding. I messaged the seller and
here is his reply:
------------------------------------------------------------------------------------
" I'll double check, but I believe another bidder and I figured that it is an "A" model since it was from 1987 (box and original invoice say '87)
Look for what I discover as an addition to the listing. Thanks!~"
-------------------------------------------------------------------------------------
It's got to be worth $400 though, even if it is an 'A'
all the best
Larry
PS It's possible to update the eprom, I'm told
but then you most probably will have an A5 Mhz which i guess you could live with as well
also you should know the size of the A board in terms of length and width is a bit smaller then the B and C boards
Best
Steve
- Steve B
- Site Admin
- Posts: 10140
- Joined: Sun Jul 29, 2007 10:02 am
- Location: New York City USofA
- Contact:
Re: Novag Super Expert on ebay
i never measured it exactly Jaimes but i would guesstimate about a 1/2 inch smaller length and width wise..the thickness of the board is the sameJaimes Conda wrote:Hello Steve. How much is a ''bit smaller than''?....Thanks Jaimes.Steve B wrote:i guess you can do thatLarry wrote:Looks like it is not the C6 version
hard to tell but it might be the B or even the A program running at 5 or 6 Mhz
Good Luck Regards
Steve
Oops!.... looks like I'm the current high bidder on an 'A'.
Oh well, over a week to go in the bidding. I messaged the seller and
here is his reply:
------------------------------------------------------------------------------------
" I'll double check, but I believe another bidder and I figured that it is an "A" model since it was from 1987 (box and original invoice say '87)
Look for what I discover as an addition to the listing. Thanks!~"
-------------------------------------------------------------------------------------
It's got to be worth $400 though, even if it is an 'A'
all the best
Larry
PS It's possible to update the eprom, I'm told
but then you most probably will have an A5 Mhz which i guess you could live with as well
also you should know the size of the A board in terms of length and width is a bit smaller then the B and C boards
Best
Steve
Steve
-
- Member
- Posts: 52
- Joined: Fri Aug 03, 2007 9:33 pm
Re: Novag Super Expert on ebay
Thanks Steve..........JaimesSteve B wrote:i never measured it exactly Jaimes but i would guesstimate about a 1/2 inch smaller length and width wise..the thickness of the board is the sameJaimes Conda wrote:Hello Steve. How much is a ''bit smaller than''?....Thanks Jaimes.Steve B wrote:i guess you can do thatLarry wrote:Looks like it is not the C6 version
hard to tell but it might be the B or even the A program running at 5 or 6 Mhz
Good Luck Regards
Steve
Oops!.... looks like I'm the current high bidder on an 'A'.
Oh well, over a week to go in the bidding. I messaged the seller and
here is his reply:
------------------------------------------------------------------------------------
" I'll double check, but I believe another bidder and I figured that it is an "A" model since it was from 1987 (box and original invoice say '87)
Look for what I discover as an addition to the listing. Thanks!~"
-------------------------------------------------------------------------------------
It's got to be worth $400 though, even if it is an 'A'
all the best
Larry
PS It's possible to update the eprom, I'm told
but then you most probably will have an A5 Mhz which i guess you could live with as well
also you should know the size of the A board in terms of length and width is a bit smaller then the B and C boards
Best
Steve
Steve
- Steve B
- Site Admin
- Posts: 10140
- Joined: Sun Jul 29, 2007 10:02 am
- Location: New York City USofA
- Contact:
Re: Novag Super Expert on ebay
hi LarryLarry wrote: Oops!.... looks like I'm the current high bidder on an 'A'.
Oh well, over a week to go in the bidding. .
looks like you are still on the hook for the A5 with a little more then a day to go
The seller did revise the auction to mention the A status ..as you said he would..
i enjoyed the spin he put on it though..
"confirmed original first release"
..none other then the.. A model ..folks
he makes it sound as if it is a hard to find First Edition of a rare book or manuscript
there does seem to be a large amount of interest in the auction though,as it has received close to 1200 hits/views when i last checked it
good luck being out bid on it(or in winning..which ever way you want this to end up)
http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... 0153303863
Watching Regards
Steve
Yes Alain, I was just about to say the same thing. But still, it'sAlain wrote:how can this guy pretend it is "as new" when you already can see in these small pictures the lighter circles on white squares where pieces rested too long ???
best regards,
Alain
probably worth $400, so if I win, then so be it.
Larry
- Terry McCracken
- Senior Member
- Posts: 1300
- Joined: Tue Jul 31, 2007 5:49 pm
Would you rather have a "C" for $600??Larry wrote:Yes Alain, I was just about to say the same thing. But still, it'sAlain wrote:how can this guy pretend it is "as new" when you already can see in these small pictures the lighter circles on white squares where pieces rested too long ???
best regards,
Alain
probably worth $400, so if I win, then so be it.
Larry
Forte Regards,
Terry
A 'C' Super Forte, not Super Expert? Thanks for the offer Terry, but I've already gotTerry McCracken wrote:Would you rather have a "C" for $600??Larry wrote:Yes Alain, I was just about to say the same thing. But still, it'sAlain wrote:how can this guy pretend it is "as new" when you already can see in these small pictures the lighter circles on white squares where pieces rested too long ???
best regards,
Alain
probably worth $400, so if I win, then so be it.
Larry
Forte Regards,
Terry
one of those. And a 'B' Super Forte. If I win this auction, it will complete the
set.
regards
Larry
- Terry McCracken
- Senior Member
- Posts: 1300
- Joined: Tue Jul 31, 2007 5:49 pm
Ah dang...everyone has a Forte "C" Regards,Larry wrote:A 'C' Super Forte, not Super Expert? Thanks for the offer Terry, but I've already gotTerry McCracken wrote:Would you rather have a "C" for $600??Larry wrote:Yes Alain, I was just about to say the same thing. But still, it'sAlain wrote:how can this guy pretend it is "as new" when you already can see in these small pictures the lighter circles on white squares where pieces rested too long ???
best regards,
Alain
probably worth $400, so if I win, then so be it.
Larry
Forte Regards,
Terry
one of those. And a 'B' Super Forte. If I win this auction, it will complete the
set.
regards
Larry
Terry
P.S. I bet you have a Designer Mach III as well....
- Steve B
- Site Admin
- Posts: 10140
- Joined: Sun Jul 29, 2007 10:02 am
- Location: New York City USofA
- Contact:
Congrats Larry!Larry wrote:Yes Alain, I was just about to say the same thing. But still, it'sAlain wrote:how can this guy pretend it is "as new" when you already can see in these small pictures the lighter circles on white squares where pieces rested too long ???
best regards,
Alain
probably worth $400, so if I win, then so be it.
Larry
you are ..
http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... :IT&ih=018
Off The Hooks Regards
Steve